NS0-164 Tested & Approved Network Appliance NACA Certification Study Materials
Validate your Skills with Updated Network Appliance NACA Certification Exam Questions & Answers and Test Engine
NEW QUESTION # 54
What is the maximum number of disk shelves per loop in a fabric-attached MetroCluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 55
Which capacity and parity savings feature is configured at the factory with all AFF systems?
- A. RAID-TEC
- B. RAID4
- C. ADP root-data-data
- D. ADP root-data
Answer: C
NEW QUESTION # 56
Which command allows you to access the other nodes console after a takeover has occurred?
- A. takeover
- B. switch
- C. toggle
- D. partner
Answer: D
NEW QUESTION # 57
What are two logical network components of ONTAP? (Choose two.)
- A. VLAN
- B. Network port
- C. SFP+
- D. Interface group
Answer: A,D
NEW QUESTION # 58
How can you "throttle" Snap Vault updates and baseline transfers so that the primary or secondary is not transmitting data as fast as it can?
- A. SnapVault doesnt support throttling of network throughput
- B. Use the snapvault throttle command.
- C. Use the -k option in the snapvault start command.
- D. None of the above
Answer: C
NEW QUESTION # 59
NetApp X1024 Fibre Channel HBA is required on the storage systems for IP over Fibre Channel functionality.
- A. False
- B. True
Answer: B
NEW QUESTION # 60
Which two supported methods would you use to restore data from a SnapVault for NetBackup Volume?
- A. Use the snapvault restore Data ONTAP command
- B. Use drag-and-drop technologies
- C. Use the SnapRestore Data ONTAP service
- D. Use the NetBackup Administration Console
Answer: B,D
NEW QUESTION # 61
Which command creates a new SyncMirror aggregate, letting Data ONTAP select the disk drives?
- A. aggr mirror aggrX-n 12
- B. aggr create aggrX-d 12
- C. aggr create aggrX-m 12
- D. aggr mirror aggrX-m 12
Answer: C
NEW QUESTION # 62
Which one of the following does SnapRestore revert?
- A. File content
- B. Snapshot schedules
- C. Volume option settings
- D. RAID group size
Answer: A
NEW QUESTION # 63
The snapvault restore command is ran on the:
- A. Primary system to pull data from the secondary system
- B. Secondary system to push data to the primary storage appliance
- C. Secondary system to push data to Open System
- D. Primary Open System to pull data from the secondary system
Answer: A
NEW QUESTION # 64
For aggregates or traditional volume SyncMirror to work correctly, the configuration of each plex must be identical with regard to____________.
- A. NDMP and snapshots.
- B. NVRAM.
- C. RAID groups and disk sizes.
- D. Mirrored snapshots.
Answer: C
NEW QUESTION # 65
If you were troubleshooting and wanted to look at SnapMirror log files, what is the path and directory to these files?
- A. destination volume, /etc/log/
- B. root volume, /etc/log/
- C. ootvolume, /etc/log/snaplog/
- D. root volume, /etc/snaplog/
Answer: B
NEW QUESTION # 66
Which ONTAP feature will allow WORM and non-WORM volumes in the same aggregate?
- A. Unified Aggregate
- B. SnapLock Enterprise
- C. NetApp Aggregate Encryption
- D. SnapLock Compliance
Answer: A
NEW QUESTION # 67
An administrator Is troubleshooting failover to an ONTAP SVM-DR destination cluster. The failover test works but stops replication. The administrator has a requirement to keep SnapMirror replication running while performing the failover test.
What ONTAP feature will accomplish this task?
- A. SnapRestore
- B. FlexClone
- C. SM-BC
- D. SMS
Answer: C
NEW QUESTION # 68
A volume can contain up to___snapshots concurrently.
- A. 0
- B. Depends on capacity and number of disk drives
- C. 1
- D. 2
Answer: C
NEW QUESTION # 69
After configuring an ONTAP duster for SAN access, the administrator is notified that the cluster nodes are connected to separate fc switches.
Given the following output:
What action will correct the redundancy issue?
- A. swap cable at node-01 / lc with cable at node-02 / lc
- B. swap cable at node-01 / la with cable at node-01 / Id
- C. swap cable at node-01 / Id with cable at node-02 / Id
- D. swap cable at node-01 / lb with cable at node-02 / lb
Answer: C
NEW QUESTION # 70
Which tool is available on a non-NetApp primary system to assist in starting or stopping SnapVault, modifying NDMP settings, enabling debugging, and capturing trace files?
- A. svdebug.exe
- B. Data Fabric Manager
- C. Svconfigurator GUI
- D. None of the above
Answer: C
NEW QUESTION # 71
In a fabric-attached MetroCluster, hardware disk ownership by a node is determined by which two factors (Choose two.)
- A. how the disks are configured by the administrator
- B. the location of the HBA or onboard port
- C. the system ID of the controller
- D. which switch ports the controller and disks are connected to
- E. what types of ports are on the HBA
- F. what types of disks are used in the cluster
Answer: B,D
NEW QUESTION # 72
An administrator wants to present datastores to a VMware environment that is using VLAN-10 and creates an SVM with NFS enabled on lif_NFS.
What does the administrator need to correct?
- A. Modify lif_MGMT to port eOf-10
- B. Enable the NFS option "-vstorage" on svmNFSl
- C. Modify lif_NFS to porte0f-10
- D. Change the Default broadcast domain MTU to 9000
Answer: C
NEW QUESTION # 73
Which one of the following keywords alone can be used to convert an asynchronous mirror to be synchornous?
- A. src_con
- B. outstanding
- C. sync
- D. cksum
Answer: C
NEW QUESTION # 74
Refer to the exhibit.
Based on the CPU headroom statistics provided for one node in the cluster, what is the available performance capacity?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 75
Which one of the following statements is true of storage appliance SnapVault backup?
- A. The file is the basic unit for SnapVault backup.
- B. The volume is the basic unit of SnapVault backup.
- C. The directory is the basic unit for SnapVault backup.
- D. The qtree is the basic unit for SnapVault backup.
Answer: D
NEW QUESTION # 76
To restore a qtree protected with SnapVault from the secondary storage system to the primary storage system, you can ______________. (Choose two.)
- A. overwrite the existing qtree on the primary storage system with DOT 7.3
- B. delete the existing qtree from the secondary storage system with DOT 7.3
- C. add the new qtree to the primary storage system with DOT 7.2
- D. restore to a non existing qtree, with DOT 7. 2
Answer: A,D
NEW QUESTION # 77
SnapMirror will automatically tiy to restart a transfer after_________.
- A. A manual update is interrupted
- B. Ail initial transfer is interrupted
- C. A scheduled incremental update is interrupted
- D. A transfer interrupted by reboot
Answer: C
NEW QUESTION # 78
......
NS0-164 [Mar-2026] Newly Released] NS0-164 Exam Questions For You To Pass: https://vceplus.practicevce.com/NetworkAppliance/NS0-164-practice-exam-dumps.html